Serial Configuration Method
Reboot the Duo. The device will pause for twenty seconds giving you an opportunity to enter the root password. During the pause, the green heartbeat (HBT) LED,
is constantly lit. Type the password. The factory default password is
xxx. If the EtherPAD does not recognize a valid password within the twenty-second
interval, the normal boot procedure will start. This can be recognized by a rapidly blinking heartbeat LED. Once the boot process has completed, the heartbeat
will revert to a steady beat of approximately once a second.
Log into the Boot Loader
If a valid password has been entered and recognized by the EtherPAD, the upgrade menu as shown below will be displayed. Select Option 1 to enter the
System Recovery Mode. 'Y' to continue.
Enter System Recovery Mode
Various options are available to the user. Only use option
4. Revert to Emergency recovery mode as a last resort.
Option
1 will remove the StartScripts file which is used to automatically start scripts on normal EtherPAD startup.
The device reboots and you can edit the scripts that were causing problems.
System Recovery Menu
