The PocketPAD 1 is a compact, low-cost device server which connects an asynchronous serial devices to Ethernet networks through a single serial interface. It can be mounted on a DIN Rail or simply left as a standalone device.

Ethernet devices could be a server application polling for information from the serial unit, or a controller with an Ethernet port. A COM Port Redirector software tool can also be employed to provide a virtual COM Port which is tunnelled through to the PocketPAD via Ethernet for server applications that are not bundled with network connectivity options (i.e. legacy systems).

The PocketPAD also provides a transparent serial link over the Ethernet network between two serial devices, when used with another PocketPAD.

The PocketPAD 1 is available with RS232 only or with a RS232/RS485/RS422 interface configurable via internal dip switches.

• Device network connectivity via UDP/IP, TCP/IP.
• Easy device management via Telnet, Web Browser, SNMP, BootP/DHCP/TFTP, Serial Interface, or EtherPAD Explorer Configuration tool.
• Flash memory for convenient software updates.
• Low cost and Compact size.
• One RS232 serial interface or one RS232/RS485/RS422 serial interface.

Software Specification:

• Network Protocols: TCP/IP, UDP/IP, BootP/DHCP, TFTP, ICMP, ARP, Telnet, HTTP, SNMP (v1 & v2)
• Serial Protocols: Raw, TC500 (Burroughs Poll Select)
• Parity: None, Even, Odd, Mark, Space
• Flow Control: Hardware (RTS/CTS), Software (XON, XOFF), None
• Data Size: 5, 6, 7, 8
• Stop bits: 1, 2
• Data Throughput: Up to 300400 Baud
• Web Server
• Debug and diagnostic tools
• Password protection
• Firmware upgrade over serial Kermit
• 25 concurrent network connections

Hardware Specification:

• Atmel ARM9 processor
• 8MB RAM, 4MB Flash
• 10/100Base-T autodetect Ethernet interface
• RS232 and/or optional RS422/RS485 Serial interface
• RS232 Serial configuration interface
• LED indication for Ethernet, Serial & system status
• Jumper selectable Power-over-Serial on pin 9 (200mA, 5V DC)

Electrical Specification:

• Power requirement: 2W (5V DC)
• Consumption: 200mA

A light weight switchmode power supply is available. Interchangeable connector options are available. Wall mount options include US, UK, EU, AU connectors. A figure 8 connector is also avilable for a desktop solution.
   
Physical Specifications:

• Ethernet: RJ45 connector (10/100Base-T)
• Serial port: RS232: DB9 male connector
• Enclosure: Opaque Green Polycarbonate casing and faceplate.
• Dimensions: 120mm x 90mm x 40mm
• Weight: 151 grams, 160 grams (RS-232/422/485 version)
• PSU Weight: 98 grams
• Temperature Range Operating: 0 degrees Celsius to 60 degrees Celsius
• Temperature Range Storage: -10 degrees Celsius to 80 degrees Celsius

Removable DIN-rail Mounting Kit
Mount your PocketPAD on a DIN Rail.

Duplicate IP Addresses
Broadcasting UDP/IP packets